Subscription

1. Sector:Non Classified Contract awarded for Purchase contract for electric bus procurement lot-0001, title procurement of solo electric buses, description the procurement of the solo buses defined below under a purchase contract according to the conditions detailed in the technical description of the public procurement documentation procurement of solo electric buses suitable for urban public transport (15 pcs) expected minimum technical requirements expectation solo vehicle category m3/i vehicle quantity (pcs) 15 vehicle design low-floor mileage (km/year/vehicle) at least 50000 length (mm) max. 12500 width (mm) maximum 2550 height (mm) maximum 3500 interior height (mm) at least 2000 passenger aisle width (mm) at least 450 front and rear ramp angle (°) at least 7 threshold height without kneeling (mm) max.340 threshold height with kneeling function (mm) max. 270 turning radius (mm) maximum 12000 number of doors 3 double-wing doors operation inward-opening remote-controlled doors, of which 2 have a minimum clear opening width of 1100 mm measured at the height of the handrails, and one door must have a minimum clear opening width of 1200 mm. door glazing door wings must be deeply glazed. drive motor type electric drive motor power in continuous operation at least 160 kwh drive motor peak power at least 240 kw range (km) 300 - 600 (uitp sort 2) - evaluation criterion battery (kwh) 350-450 - evaluation criterion battery thermal management must have a thermal management system battery lifespan the bidder must guarantee that the drive batteries have at least 80% soh after 10 years. onboard charger (kw) at least 150 charger connector type according to iec 62196-3 standard ccs type2 capacity without driver (persons) 80 -90 - evaluation criterion passenger seating (pcs) 27 – 35 tires must be equipped with all-season tires marked with 3pmsf in accordance with valid authority regulations. their lifespan must be at least 120,000 km on both the driven axle and the steered axle. maintenance expectations the bidder is required to provide a lifetime cost plan projected for the vehicles, which includes all foreseeable repair and maintenance costs arising from operational use for a 10-year period based on an assumed mileage of 50,000 km/year. the plan must include foreseeable maintenance costs broken down annually in terms of materials and labor, foreseeable repair costs broken down annually in terms of materials and labor, and foreseeable battery replacement costs broken down annually. operating and maintenance instructions the bidder must provide the vehicle's operating and maintenance instructions as part of the offer, which must be clear. the bus manufacturer cannot provide instructions different from those of the parts or main unit supplier. in particular, it cannot specify a longer lifespan or repair and maintenance cycle than that ordered by the parts or main unit supplier. the contracting authority reserves the right to verify the data regarding lifespan, repair, and maintenance with the parts or main unit manufacturer. technical description the bidder must provide the technical description of the vehicle as part of the offer, which must include at least the vehicle type certificate or registration permit, size and weight data, description of the equipment, type of air conditioning system, type of heating system, type of passenger information system route indicator and internal display, as well as the drive axle ratio. lifespan expectation 300,000 km (without repair, major repair, replacement, or disassembly-related inspection) rubber and plastic brake hoses, lifespan expectation 400,000 km (without repair, major repair, replacement, or disassembly-related inspection) gas springs for the lid support, switches, push buttons, passenger seat, driver's seat, heating and ventilation system, drive shaft, compressor, air conditioning compressor, tachograph, leveling valve, engine mounts, hoses of the cooling and heating system lifespan expectation 600,000 km (without repair, major repair, replacement, or disassembly-related inspection) chassis joint structure, steering gear, steering pump, angle gearbox, cooling fan operating system lifespan expectation 800,000 km (without repair, major repair, replacement, or disassembly-related inspection) engine, chassis, control electronics the full expected equipment and technical parameters are detailed in the technical description attached as part of the public procurement documentation (in the excel table named "commercial offer/technical description"), which also serves as the commercial offer. only new vehicles can be offered. in this regard, a new vehicle is defined as one that has not been registered either in hungary or abroad, and has not been used as a demonstration or trial product. the specifications defined in the technical description are the minimum expected requirements. the offered vehicles must have at least the expected technical properties prescribed by the contract HUF 227.85 Cr HUF 2.27 Bn
12-Sep-2026
TAID : 14856419 Netherland | Not Classified

Subscribe to our service and get access to all similar Tenders.

Plan Service type Validity Plan Amount (INR)
TOD 0 1770
Email +Web 12 Months 5900
Email +Web 12 Months 9440
Email +Web 12 Months 11800
Email +Web 12 Months 21240
Top