|
Requirement :
|
Specail/repair to Pwd Road Mangalpur to Saralia for Clearing Grass and Removal of Rubbish on Both Sides of the Road to Facilitate Widening of Berms, Disposal of the Stuff Including All Labour, T&p Articles Required for the Work Etc.complete as Per Clause 201 of Mord., Flank Dressing to Proper Camber Etc Complete, Labour for Scraping Cleaning the Road Surface Applying Tack Coat Using 3.0 Kg of Bitumen for 10 Sqm and Laying 37.5mm Thick Built Up Spray Grouting in One Layers Using 0.45cum of 25mm to 40mm Size Hard Granite Metal and 12.00kg Penetration Grade of Bitumen for 10 Sqm with 0.12 Cum of 12mm Size Hard Granite Chips as Key Stone for 10 Sqm Spreading Over and Laying Etc (to Be Used for Minor Repair Works Only ), Providing and Applying Tack Coat Over the Bituminous Surface, with Bitumen Emolusion (rs-1) Using Emolusion Distributor Cleaned with Hydraulic Broom as Per Technical (mord) Specification as Per Clause No.503., Labour for Laying 20 Mm Thick Premix Carpet Using 0.27 Cum of 13.2 Mm to 5.6 Mm Size Crushed Stone Chipping and 14.60kg Penetration Grade of Bitumen for 10 Sqm Including Hand Packing to Proper Camber and Consolidation with Prr Including Hire & Running Charges of Prr , Hot-mix Plant, bitumen Boilers and All Other T&p Articles Etc(to Be Used for Minor Repair Works ) , Labour for Laying 6mm Thick Precoated Seal Coat Type-b Using 0.06 Cum of 6.7mm Size Chips as Per Sieve Analysis and 6.8kg of Bitumen Per 10sqm Including Hire& Running Charges of Prr, hot-mix Plant , Tar Boiler and All Other T&p Articles Etc, Finishing Surface of Walls with Cement Based Putty ( Water Based) of Approved Make & Finished Smooth and Even Surface to Receive Painting Including Cost of Scaffolding Staging Charges with Cost of All Materials Taxes Etc. Complete, Painting 2-coats with Plastic Emulsion Paint of Approved Shade on New Work 1coats to Give An Even Shade Excluding Cost of Paint., Construction of Un-reinforced, Plain Cement Concrete Pavement Over a Prepared Sub-base with 43 Grade Cement @ 350 Kg /cum Coarse and Fine Aggregate Confirming to Is:383, maximum Size of Coarse Aggregate Not Exceeding 25 Mm, mixed in Aconcrete Mixer of Not Lessthan .2cum Capacity Andappropriate Batching and Mixing Plant as Per Approved Mix Design, transported to Site, laid with a Fixed Form Or Slip Form Paver, spread, compacted and Finished in a Continous Operation Etc , Curing Compound , finishing to Lines and Grades as Per Drawing and as Per Clause 602 of Mosrt&h Specifications for Road & Bridge Works (4th. Revision) (taking Output = 75 Cum)(172.50t)(100x3.75x.20), Earth Work in Ordinary Soil From Approved Borrow Area By Mechanical Means Including Loading Into & Transportation By Transport Vehicles & Unladoing the Same on Properly Prepared Surface Including Rough Dressing & Breaking Clods Etc. All Complete.,
|
